CONSTRUCTA washing machine Operations Instructions download pdf (Page 13)

6

Select options and settings

By changing options and settings you

can adjust the washing program to suit

your own specific requirements.

The machine will remember which settings

and options you chose for each program and

will use them the next time you select that

program. You can of course change the

options if you want.

30

40 50

60

95

Cold

1200

800

Temperature

Select temperature by pressing the

Temperature button until the red field lights

up beside the desired temperature.

You can select temperatures between 30 °C

and 95 °C or Cold. If you select Cold, the

washing temperature will be the same as that

of the water coming into the machine.

For Wool/Hand it is not possible to select a

temperature higher than 40 °C. See the table.

Spin speed/No spin

Select the spin speed by pressing the Spin

button until the red field next to the spin speed

you want lights up.

You can select speeds between 800 and

1200 rpm, No spin

Spin at 800 rpm always signifies short spin.

A spin between 400 and 800 rpm is always a

short spin.

For certain programs, it is not possible to

select a speed in excess of 800 rpm (see

table).

No spin means that the program does not

include a spin cycle and ends by draining.

7

Close the door and press the

Start/Stop button

To add or remove washing after the

program starts

If you want to add or remove items after the

program has started, you can stop the

program by pressing and holding the Door

opening button (key symbol) for three

seconds. The red field will flash. When you

restart the machine, add any extra detergent

needed and close the door. The machine

continues automatically from the point where

the program was interrupted.

Stopping or changing a program

You can also stop a program by pressing the

Start/Stop button for three seconds. To restart

the machine, select a new program, add any

extra detergent needed and press the

Start/Stop button.

13

Washing

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments